Fire Stop Sticker

FIRE STOP STICKER is a kind of breakthrough product with ultra-high fire extinguisher efficiency and reliability in fire fighting industry.The product has the characteristics of small size,atmospheric pressure storage,corvenient installation,rapid response,efficient fire-fighting,simple maintenance, non-toxic and harmless,safe and reliable.

Fre extinguishing mechanism

FSS fire extinguishing agent is a new type of fire extinguishing agent.It is asolid mixture compoosed ofoxidant, reducing agent,combustion ratecontrol agent and adhesive.The release of hot fss fire extinguishing agent is through combustion reaction,and there are both substance solid and gas in the product.Most ofthem are fireextinguishing gases,such as nitrogen,carbon dioxide and water vapor.The solid particles are oxides of K (kalium)and Sr (strontium).When the released product cools and condenses,it produces very fine particles with adiameter of less than 01μm These veryfine partides can effectively absorb and neutralize the combustion free radicals in the flame,soas to achieve the chemical suppression of fire extinguishing. The aerosolformed by solid particles in the fire extinguishing gas canbe suspendedfor a long time,and can bypass obstacles and spread to every comer to bythe flame in a shortperiod oftime,the tem-perature of the flame will be reduced,and the heat radiated to thecombustion surface and used to spit the vaporizedcombustible molecules into free radicals will bereduced,and the combustion rea-ction will be restrained to a certain extent

Product parameterss

Industry Model Overall Size Material Weight Gross Weight Extinguishing Range Model#
PK. SSS. 6g 60×50 mm 6g 45g 0.06m³ SSS. 6g
PK. SSS. 12g 95×60 mm 12g 90g 0.12m³ SSS. 12g
PK. SSS. 24g 185×60 mm 24g 172g 0.24m³ SSS. 24g
PK. SSS. 36g 275×60 mm 36g 249g 0.36m³ SSS. 36g

technical standards

  • FSS fire extinguishing system -Part 1: Condensed aerosol fire extinguishing device.
  • GB 50370-2005 code for design ofgas fire extinguishing systems.
  • GB 7258-2017 technical conditions for motor vehicle operation safety.
  • GB 7258-2017 technical conditions for motor vehicle operation safety
  • GB 50263-2007 code for construction and acceptance of gas fire extinguishing systems

Not be used to the fires Gaused by the folowing substances

  • Can be oxidized without air,such as nitrocellulose,gunpowder,etc
  • Activemetals,such as potassium,sodium, magnesium,titanium,etc
  • Self decomposing compounds,such as some peroxides,hydrazine,etc
  • Metal hydrides,such as potassium fluoride, sodium hydride,etc

Solid Chemical Inhibition

The solid particles in hot fss fire extinguishing agent can adsorbOH-H+and O²-intermediates of chain reaction,and catalyze them to re formstable molecules,thus interupting the branched chain reaction in the co-mbuston process.

fire-fighting paste

After the fire-fighting paste is sprayed, it is forbidden to touch it before the shell is cooled to prevent scalding.

Cooling and extinguishing

The cooling action of the hot FSS fire extinguishing agent primarily relies on the endothermic decomposition of metal oxides and carbonates.

Gas chemical inhibition

Under the action of heat the vaporized metal ions such as sr²+,Kt Mg²+ or cations that lose electrons, whichare decomp-osed by hot FSS fire extinguishing agent.

Why Choose Us

30

Fire Alarms

50

Products

450

Family Save

FIRE STOP STICKER of suitable type should be selected according to the installation conditions in different places;

FSS fire extinguishing agent is a new type of fire extinguishing agent.It is asolid mixture composed ofoxidant,reducing agent,combustion ratecontrol agent and adhesive.

It is suitable for generator room,distribution cabinet
/room,transformer cabinet/room,compressor room, engine room,power cabinet,cable interlayer,cable well/trench,charging station/pile,communication base station/machine room,electronic computer room,places containing precision instruments and equipment,etc.

Electrical fireelectrical fire caused byleakage short circuit,overload and connect excessive resistance to the wire.